Angle Converter
CU-15Type an angle such as 180°, 1 rad or 90 gon and see it in degrees, radians, gons, turns, quadrants, arcminutes, arcseconds and three kinds of military mil. One angle per line.
Runs in your browser. Nothing is uploaded.
Values, one per line
Converted
How to use it
- Type or paste one angle per line, for example 180°, 1 rad or 0.25 turn.
- Leave out the unit on a line to use the one chosen under "Unit when none is typed".
- Choose All units, or one unit under Show, and set the significant digits.
- Press Convert, then copy the result or download it as a text file.
Degrees, radians and why one is approximate
A full turn is 360 degrees, 400 gons or 2 x pi radians. Because pi never ends, the radian is the only unit here that cannot be written as an exact fraction of a degree. The tool uses 50 digits of pi, far more than any result shows, so 180 degrees comes out as 3.141592654 rad at the default 10 significant digits. Every other factor is exact: an arcminute is 1/60 degree and an arcsecond is 1/3600 degree.
Three different mils
A mil is a thousandth of something, and the something depends on the army. The NATO mil divides the circle into 6400, the old Soviet mil into 6000 and the Swedish streck into 6300. A plain milliradian is separate again (about 6283 per circle). Because a bare "mil" could mean any of them, the tool refuses it and asks for mil (NATO), mil (USSR) or mil (Sweden).
Typing angles
The degree sign, the word degrees and the abbreviation deg all work, and so do the prime marks for arcminutes (30′) and arcseconds (45″). Gons are also called grads or gradians, and a turn is also a circle or a revolution. Negative angles and angles above 360 degrees are kept as typed, not wrapped to a single turn.
Error messages and what to do
| Message | What it means | Fix |
|---|---|---|
Line 1: could not find a number at the start of "abc". Write a value such as 12.5 km, or just 12.5. | The line does not start with a number, so there is nothing to convert. | Start each line with a value such as 12.5, then the unit if you want one. |
Line 1: unknown unit "foo". Known units: °, rad, mrad, gon, turn, quadrant, sextant, octant, arcmin, arcsec, mil (NATO), mil (USSR), mil (Sweden). | The text after the number is not a unit this tool knows. | Use one of the units listed in the message, or its full name. |
Questions people ask
How do I convert degrees to radians?
Multiply degrees by pi and divide by 180. For example 180 degrees is pi, about 3.14159 radians, and 90 degrees is about 1.5708. Type 90° into the tool and read the rad line to get it without doing the arithmetic.
How many degrees are in a gradian?
One gradian (also called a gon or grad) is 0.9 degrees, so a right angle is 100 gradians and a full circle is 400. The tool uses this exact ratio, so 90 gon comes out as exactly 81 degrees.
How many arcseconds are in a degree?
There are 3600 arcseconds in one degree: 60 arcminutes per degree and 60 arcseconds per arcminute. Type 1 deg and read the arcsec line, or type 1 arcsec to see it as 0.0002777778 degrees.
What is the difference between a NATO mil and a milliradian?
A NATO mil is 1/6400 of a circle, about 0.9817 milliradians. A true milliradian is 1/1000 of a radian, so 1 turn is about 6283 milliradians. Artillery and rifle scopes often round the milliradian to make the numbers easier, so check which one your scope uses.
Does the converter wrap angles above 360 degrees?
No. An input of 450 degrees is converted as 450 degrees, so you get 1.25 turns, not 0.25. If you need the angle reduced to one turn, subtract 360 per full turn yourself after converting.
Is a turn the same as a revolution?
Yes. In this tool turn, circle, revolution and full circle are all names for 360 degrees. The result is labelled turn, and each turn equals 2 x pi radians, 400 gons or 6400 NATO mils.
About this tool
Every factor is an exact fraction of a degree: 1 gon is 0.9 degrees, 1 turn is 360, a quadrant is 90, a sextant 60, an octant 45, an arcminute 1/60 and an arcsecond 1/3600. The three mil units are fractions of a full circle: NATO 6400 per circle, Soviet 6000, Swedish 6300 (called a streck). Radians are the one inexact unit, because pi has no end: the tool uses 50 digits of pi, which is far more than the output ever shows. Typing 90° or 90 degrees works. A bare mil is refused because it could mean any of three units, so write mil (NATO), mil (USSR) or mil (Sweden). The result rounds to the significant digits you pick, with no float noise.